HydroSeal Tap Lubricant
Eliminate tight tap handles and protect the working parts from corrosion with HydoSeal Tap Lubricant.
Applying the lubricant to the spindle, bonnet thread and O-Ring will assist in getting the maximum service life out of taps. Correct lubrication will allow the O-Ring to slide smoothly up and down the tap bonnet without tearing. It is also ideal for use in conjunction with the HydroSeal Tap Bonnet Thread Cleaner in order to make tap handles easier to turn.
- Easy to use
- Suitable for use in hot and cold taps
- Smooth fingertip operation
- Easier to turn on and off for the elderly or arthritic
A45-015
15g Tube (10 per carton)
A45-040
40g Tube (30 per carton)
1. Disassemble Tap
2. Clean Tap Bonnet
Screw the HydroSeal Tap Bonnet Thread Cleaner in and out of the Tap Bonnet.
3. Apply Lubricant To:
- Bonnet Thread
- Spindle Thread
- O-Ring
4. Reassemble Tap
Using the HydroSeal Tap Valves.
To gain maximum performance from your taps, reface the tap seat using the HydroSeal Refacing tool. For best operating results fit either a standard or Anti-Hammer HydroSeal O-Ring Tap Valve.
STANDARDS AND TECHNICAL SPECIFICATION: WaterMark certified to WMTS-014:2016 (Jointing Materials). Application temperature 10°C to 40°C. Maximum service temperature 150°C.
KEEP OUT OF REACH OF CHILDREN: For advice, contact a Poisons Information Centre (e.g. phone Australia 131 126; New Zealand 0800 764 766) or a doctor.
INGESTION: If swallowed, do NOT induce vomiting: rinse mouth thoroughly with water and contact Poisons Information Centre. or If swallowed, never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
EYE CONTACT: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses. Immediate medical attention is required.
